Preparation and Setup
Choose level, well-drained ground and remove stones, branches, roots, and other sharp objects before unfolding the tent. Fully unfold and position the tent before inflation.
Inflate the air frame to 6-8 psi using the included hand pump. Do not exceed the recommended pressure. Make sure all valves are securely closed.
Secure the tent using the included pegs and all preinstalled guy lines. Use additional anchoring if wind conditions require it. Install the rainfly when rain, snow, or prolonged strong sunlight is expected.
Temperature and Cold-Weather Use
The approved operating range is from -10 °C to +40 °C (14 °F to 104 °F).
Air pressure may decrease as the temperature falls. Check the air frame regularly and add air when necessary without exceeding 8 psi.
After use below 0 °C (32 °F), dry the tent completely in a warm, dry indoor space before storage.
Stove and Ventilation Safety
The stove is not included. Use only a compatible wood-burning tent stove installed through the designated stove jack.
Use a spark arrestor and heat-resistant stove mat. Follow the stove manufacturer’s clearance requirements.
Maintain continuous ventilation whenever a stove is operating. Use working smoke and carbon monoxide alarms. Never leave a burning stove unattended or operating while everyone is asleep.
Moisture, Packing, and Storage
Keep the vents slightly open to reduce condensation. Wipe away accumulated moisture and dry the tent completely before packing.
Fully deflate the air frame before folding. Store the tent only when every component is clean and completely dry.
